Table of Contents
Advertisement
4 Specifications
4-2-7
RS-232C Connector Specifications
The optional RS-232C interface on the Panel PC uses a standard SUBD9 connector.
The RS-232C interface is not isolated from the internal Panel PC's components.
Additional Information
• Refer to 5-4-2 Ground on page 5-28 for grounding details.
• Refer to A-3 RS-232C Connector Pin Details on page A-52 for pin details.
4-2-8
NY Monitor Link Connector Specifications
The optional NY Monitor Link connector connects an OMRON Industrial Monitor with an OMRON In-
dustrial PC that has an NY monitor link connector.
The NY Monitor Link communication is a combination of video and USB information.
Connector type
Transmission media
Maximum cable length between Industrial
PC and Industrial Monitor
Topology
Video resolution
Data throughput rate
*1.
Use a direct connection between the OMRON Industrial PC and the OMRON Industrial Monitor.
Do not use:
•
Ethernet switches
•
Ethernet hubs
•
Daisy chain connections
The NY Monitor Link connector locks automatically to prevent unintentional disconnection.
4-30
Item
RJ45
Twisted pair cable of category 6A or higher (double-shielded
straight cable with copper braiding and aluminum foil)
100 m
Line (direct) connection only
1,280 x 800 pixels at 60 Hz (12", 15")
1,920 x 1,080 pixels at 60 Hz (19")
280 Mbps max.
Specifications
*1
NY-series Industrial Panel PC Hardware User's Manual (W555)
Advertisement
Table of Contents
