Power Off; Power Off Using The Power Button; Power Off Using Windows Shut Down - Omron Sysmac NYP-0 Series Hardware User Manual

6-3

Power OFF

This section provides Power OFF details.
Before following power OFF procedures below, check that the Industrial Panel PC is ON by examining
the LED indicators on the Panel PC.
6-3-1

Power OFF Using the Power Button

1
Ensure all programs are closed.
If required close all active programs.
2
Press and release the power button on the Industrial Panel PC within 1 second.
The Industrial Panel PC will shutdown.
Note that this behaviour of can be reconfigured with the Power Options settings.
Refer to 3-3 Power Button on page 3-12 for power button location information.
3
Wait until the PWR LED is OFF.
The Panel PC is powered OFF.
Additional Information
The Panel PC will restart automatically if a UPS is connected to the I/O connector of the Panel
PC. Use the Power button of the UPS or remove the input power from the UPS for a normal
shutdown of the Panel PC.
6-3-2

Power OFF Using Windows Shut Down

1
Ensure all programs are closed.
If required close all active programs.
2
Select the Windows Shutdown button.
To display the Shutdown button:
• For Windows 10 select the Windows button and then the Power button.
• For Windows 7 select the Windows button.
The Industrial Panel PC will shut down.
3
Wait until the PWR LED is OFF.
The Industrial Panel PC is powered OFF.
NY-series Industrial Panel PC Hardware User's Manual (W555)
6 Operating Procedures
6
6-5