Wire; Wiring Warnings And Cautions; Ground - Omron Sysmac NYP-0 Series Hardware User Manual

5 Installation
5-4

Wire

This section describes how to wire the Industrial Panel PC.
5-4-1

Wiring Warnings and Cautions

This section describes the Warnings and Cautions when wiring the Industrial Panel PC.
Provide safety measures in external circuits to ensure safety in the system if an ab-
normality occurs due to malfunction of the product or due to other external factors af-
fecting operation. Not doing so may result in serious accidents due to incorrect opera-
tion.
Emergency stop circuits, interlock circuit, limit circuits, and similar safety measures
must be provided in external control circuits.
Unintended behavior may occur when an error occurs in internal memory of the prod-
uct. As a countermeasure for such problems, external safety measures must be pro-
vided to ensure safe operation of the system.
Precautions for Safe Use
Do not let metal particles enter the product when preparing the panel. Do not allow wire clip-
pings, shavings, or other foreign material to enter any product. Otherwise, the product burning,
failure, or malfunction may occur. Cover the product or take other suitable countermeasures,
especially during wiring work.
5-4-2

Ground

This section describes how to ground the Industrial Panel PC.
Always connect to a ground of 100 Ω or less when installing the product.
5-28
WARNING
WARNING
WARNING
WARNING
NY-series Industrial Panel PC Hardware User's Manual (W555)