Table of Contents
Advertisement
SYSTEM MENU
ACCESS THE MAIN MENU BY PRESSING THE MENU BUTTON FOR AT LEAST 5 SECONDS.
DMX SETTINGS - The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX
Channel Mode, and No DMX Status.
•
DMX ADDRESS - In this submenu you can find and set your desired DMX address.
•
DMX CHANNEL MODE - In this submenu you can find and set your desired DMX channel mode.
•
NO DMX STATUS - This submenu setting is used as a precaution mode in case the DMX signal is
lost or interrupted. The operating mode chosen in this submenu is the running mode the fixture will
go into when the DMX signal is lost. Listed below are the 3 modes.
•
Hold Last - This setting will have the fixture stay in the last DMX setup.
•
Blackout - This setting will have the fixture automatically go into stand by mode.
•
Manual - This setting will go into the current manual control set up.
PERSONALITY - The submenus listed under PERSONALITY are as follows: Status Settings, Fan
Settings, Dim Modes, LED Refresh Rate, Gamma, Reset Motors, Display, and Service.
•
STATUS SETTINGS - In this submenu you are able to access and adjust/change: Pan Invert, Tilt
Invert, P./T. Feedback, P./T. Speed, and Hibernation.
•
FAN SETTINGS - In this submenu you are able to select your desired fan speed setting.
•
DIM MODES - In this submenu you are able to select your desired dimmer mode and adjust the
dimming speed time.
•
LED REFRESH RATE - In this submenu you are able to select your desired LED refresh rate.
•
GAMMA - In this submenu you are able to select your desired gamma setting.
•
RESET MOTORS - In this submenu you are able to reset selected motors.
•
DISPLAY - In this submenu you you are able to adjust the display intensity, display inversion, actvi
ate the display blackout, and activate/deactivate the display lock.
•
SERVICE - In this submenu you are able to access: the calibration (effect adjust), activate the
service port, update software, and restore the factory settings.
MANUAL CONTROL - This menu is for manual testing and manual control. Pan, tilt, color wheel,
shutter, dimmer, zoom, pan/tilt speed, and LED refresh rate can all be tested/adjusted.
NOTE: NO DMX STATUS must be set to "Manual" when using Manual Control.
19
Advertisement
Table of Contents
