ADJ PAR Z MOVE RGBW User Instructions page 11

INSTALLATION
Screw one clamp each via a M12 screw and nut into the Omega brackets. Insert the quick-lock fasteners
of the Omega brackets into the respective holes on the bottom of the Par Z Move RGBW. Tighten the
quick-lock fasteners fully clockwise. Pull a safety cable through the safety cable attachment points
located on the base plate and over the trussing system or a safe fixation spot. Insert the end in the
carabiner and tighten the safety screw.
*SAFETY CABLE
ALWAYS ATTACH A SAFETY
CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE
FIXTURE WILL NOT DROP IF THE
CLAMP FAILS.
11