Setting Of The Usage, User Groups; Area Of Use Of Disk Type Non-Return Valves; Permissible Operating Media, Pressures And Temperatures - Pentair SUDMO P740 Operating Instructions Manual


The service rooms must be free of dust.
Dust deposits on the fittings must be avoided.

The system in which the disk type non-return valves are installed must be grounded.

The ignition temperatures of existing potentially explosive media must not be exceeded by hot media within the
fittings or the hot surface temperatures of the fittings.

The disk type non-return valves have a corresponding fitting identification, which corresponds to Directive
2014/34/EU of the European Parliament and the Council as well as the standard DIN EN 80079-36:2016-12.

The specifications on the respective type plate apply to each disk type non-return valve.
II 2 G Ex h IIB 80°C...150°C Gb
II 2 D Ex h IIIC T150°C Db
3.6.

Setting of the usage, user groups


The fittings are only intended for commercial use.
Private use of the fittings is not permitted.

The fittings may only be unpacked, transported, mounted, assembled, connected, commissioned, operated, ser-
viced, repaired, dismantled, decommissioned, stored and disposed of by qualified personnel.

Heavy valves must be transported with suitable load handling equipment in accordance with the valid national,
regional and internal company regulations.
3.7.

Area of use of disk type non-return valves

Use of Pentair Südmo disk type non-return valves, for example in  breweries
3.8.

Permissible operating media, pressures and temperatures

8 / 34
Copy of the original operating instructions
BAA RV Solid
Operating Instructions
Disk type non-return valves
RV Solid series
Type: P740, P741, P745, P750 and P760
DN 010 – 150, OD 0.50" – 6.00", ISO 008 – 125
 the beverage industry
 the foodstuffs industry
 the pharmaceutical industry
 the chemical industry
 the cosmetic industry
en