Spare Parts; Assembly Tools; Assembly Of Joint Clamp - Pentair SUDMO P740 Operating Instructions Manual

14.2.

Spare parts

Only use original spare parts.

Original spare parts, see spare parts of the respective disk type non-return valve.

Smooth operation of the disk type non-return valve is only guaranteed when using original
spare parts.
14.3.

Assembly tools

Quantity
1 Double open ended wrench
(wrench size) 14 – 15
1 Double open ended wrench
(wrench size) 17 – 19
1 Punch 155 mm
1 Torque wrench with socket
wrench (wrench size 17)
2 Brush (small) S400 g. 2
14.4.

Assembly of joint clamp







22 / 34
Copy of the original operating instructions
BAA RV Solid
Type: P740, P741, P745, P750 and P760
DN 010 – 150, OD 0.50" – 6.00", ISO 008 – 125
Information/notice
Tool
Information/notice
Fig. 1
Only install the clamp in perfect technical condition (Fig. 1)
 No visible deformations (for example bent feet, bent forks, etc.)
The clamping feet are not permitted to touch after tightening (Fig. 2).
Grease screw thread before assembly  grease type IBF PW 119
Place clamp on clamp connection.
Insert screw with hexagonal nut (S) into the groove of the fork.
Tighten the hexagon nut (S) with a torque wrench  Tightening torque 8 Nm.
Operating Instructions
Disk type non-return valves
RV Solid series
Fig. 2
Fig. 3
en
for Order no.
All sizes 2112345
All valve types
All sizes 2112372
All valve types
0098525
All sizes
All valve types
All sizes
All valve types
All sizes 0050799
All valve types