Receipt Of The Product And Installation - AERMEC WRL Series Manual

Reversible / chiller - heat pumps water/water
Table of Contents

Advertisement

FOR THE INSTALLER
1.
RECEIPT OF THE
PRODUCT AND
INSTALLATION
1.0.1. Receipt and handling
The machine is sent from the factory
wrapped with estincoil placed on a loading
pallet
Before handling the unit, verify the lifting
capacity of the machines used.
Handling must be performed by qualified,
suitably equipped staff.
Handling the machine:
- Whenever it is envisioned to lift the
machine with belts, so as not to damage
the structure, place protections between
the belts and the framework. It is
prohibited to stop below the unit during
lifting.
- The machine must always be kept in a
vertical position;
- The instructions found on the machine
on an integral part of the same. It is
recommended to read them and keep
them with care.
- WARNING: The units CANNOT be stacked.
1.0.2. Selection and place of
installation
The WRL water/water INDOOR heat pump
with gas side inversion (R410A) is sent from
the factory already inspected and only
requires electric and hydraulic connections
in the place of installation.
Before beginning installation consent with
client and pay attention to the following
recommendations:
− The support surface must be capable of
supporting the unit weight.
− The safety distances between the units
and other appliances or structures must
be scrupulously respected.
− The unit must be installed by a skilled
technician in compliance with the
national law in force in the country of
destination.
− It is mandatory to foresee to the
necessary technical space in order to
allow ROUTINE AND EXTRAORDINARY
MAINTENANCE interventions.
− Remember that whilst operational the
chiller can cause vibrations; therefore
"VT"anti-vibration mounts (accessories)
are recommended, fixed on the base
according to the assembly layout.
− Fix the unit, checking that it is level.
6
► HANDLING
► MINIMUM TECHNICAL SPACES
600mm
600mm
The unit has to be installed in technical
rooms, or rooms which have at least a
drain on the floor.
600mm
600mm
ATTENTION:
DRAWINGS ONLY INDICATIVE
IWRLI2. 1810. 4900577_05

Advertisement

Table of Contents
loading

Table of Contents