Wireless Network - Check Point QUANTUM SPARK 1570 Getting Started Manual

Wireless Network

For WiFi models only:
In the Wireless Network page, configure wireless connectivity details.
When you configure a wireless network, you must define a network name (SSID). The SSID (service set
identifier) is a unique string that identifies a WLAN network to clients that try to open a wireless connection
with it.
We recommend that you protect the wireless network with a password. Otherwise, a wireless client can
connect to the network without authentication.
To configure the wireless network now:
1. Select Configure wireless network now
2. Enter a name in the
access points in the transmission area.
3. Select Protected network (recommended)
4. Enter a Password
5. The Hide password option is selected by default.
6. Allow access from this network to the local network
wireless network is considered trusted and access is allowed from it to the local network.
7. Radio Band
2.4GHz: 2414-2462 MHz
n
5GHz: 5180-5240, 5260-5320, 5500-5720, 5745- 5825MHz
n
.
Network name (SSID)
.
Quantum Spark 1570 / 1590 Appliance R80.20.XX Getting Started Guide | 50
field. This is the name shown to clients that look for
if the wireless network is protected by password.
is selected by default. This means the
Wireless Network