Chrysler Pacifica Hybrid 2021 Supplement Manual page 18

16 GETTING TO KNOW YOUR VEHICLE
NOTE:
During normal operation, the charge connector
or AC plug may feel warm. If either one feels hot
during charging, unplug the charging cordset
and have a qualified electrician inspect the wall
receptacle before you continue charging
Ú page 93.
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE OR ELECTRIC SHOCK: Do not use the
charging cordset with a receptacle that is
worn or damaged. Using the charging cordset
with a worn or damaged receptacle may
cause burns or start a fire.
AC L 2 C (240 V
EVEL HARGING
30 A O 32 A )
MP R MP
AC Level 2 (240 V) charging requires a 240 V,
Level 2 EVSE (Charging station). A 30 Amp or
32 Amp Level 2 EVSE for home installation is
recommended.
When using public charging stations, ensure the
charging station is ready to provide charge and
the vehicle is in PARK before the charge
connector is plugged into the vehicle's charge
inlet. You will hear a "click" when the charge
connector is inserted correctly and is coupled
with the vehicle's charge inlet. The vehicle
should start charging automatically. If not,
please check the instructions at the charging
station.
NOTE:
The vehicle should start charging automatically.
If not, please check the following:
Charging Station — Check the indications and

instructions at the charging station.
Charging Schedule — Check whether the

charging schedule is enabled and if so,
whether the vehicle is currently within the
scheduled charge time/day (weekday/
weekend). If the charging schedule is
,
OLT
enabled within the vehicle, you may override
it for this charging event by plugging in the
charge connector, unplugging it, and then
plugging it back into the vehicle charge inlet.
Complete the double plug sequence within
10 seconds for it to override the set
schedule.
Hood Ajar — Check whether the hood is open.

Charging is disabled while the hood is open,
and will resume when the hood closes.
To stop the charging process:
Press the "STOP" button located on the front

of the EVSE station.
Press the button on the charge connector

first and then remove the connector from the
vehicle charge inlet.
Plug the charge handle into the EVSE station

and coil the charging cord onto its holder. Do
not leave the charging cord laying on the
ground.
C T
HARGING IMES
The following factors determine the time it
takes to charge the high voltage battery:
The high voltage battery's current state of

charge
The type of EVSE used (Level 1 - 120 V or

Level 2 – 240 V)
Ambient temperature

Whether the vehicle is ON during charging
