Chrysler Pacifica Hybrid 2021 Supplement Manual page 11

WARNING! (Continued)
Do not put fingers or objects into the

Charge Connector.
Do not use this product if the flexible power

cord or EVSE cable is frayed, broken, has
cracked insulation or any other signs of
damage.
Do not use this product if the enclosure or

the Charge Connector is broken, cracked,
open, or shows any other indication of
damage.
Do not use Portable EVSE Cordset with an

extension cord. Use of an extension cord
may cause burns, fire, or other damage or
injury.
This device may attempt to reset and run

after a power interruption.
There are no user serviceable parts inside

the AC Level 1 charging cord set. Do not
attempt to repair or service the charging
cord set yourself – personal injury may
result.
WARNING! (Continued)
When using a charging station with the

charging cable attached, ensure the cable
is not visibly damaged before plugging into
the vehicle.
Do not allow children to operate this device.

Adult supervision is mandatory when chil-
dren are in proximity to a charge station
that is in use.
Do not use a charge station or vehicle

receptacle that is worn or damaged with
the AC Level 2 charging cable. Plugging into
worn or damaged receptacles may cause
damage to the EVSE and vehicle.
Ensure that the EVSEs are always stored in

a safe place. Do not expose the EVSE
J1772 Vehicle Connector to rain or wet
conditions. Avoid allowing water or other
liquids to pour or drip on to the vehicle
connection end of the J1772 EVSE
connector. If water penetrates the elec-
trical device, the risk or electrical shock
increases. Ensure that all plugs and cables
are free of moisture before using the
(Continued)
EVSEs.
GETTING TO KNOW YOUR VEHICLE
WARNING! (Continued)
The EVSE has been tested for use in

temperatures ranging from -40°F to 122°F
(-40°C to 50°C).
The EVSE should be stored at temperatures

between -40°F and 176°F (-40°C and
80°C).
SAVE THESE INSTRUCTIONS.

EVSE Charging Cordset
The EVSE charging cordset is compliant with
SAE J1772, and applicable for use with vehicles
fitted with standard SAE J1772 charge inlets.
The EVSE includes:
A Charge Connector

A NEMA 6 rated enclosure with a Charge

Current Interrupt Device (CCID) and a status
indicator display
An AC Power Cord with NEMA 5–15P right

angle plug
An indoor/outdoor charge cable, EV-rated

A Status Indicator Display

(Continued)
9
2