7-5.How To Check The Vibration Sensor - LG WD14070D6 Service Manual

7-5 HOW TO CHECK THE VIBRATION SENSOR
Display Data View Mode
1)
043
XXX
XXX
XXX
2)
Vib_Sensor
X-axis_01
Vib_Sensor
X-axis_02
1) Data View Type : Touch and Hold Pre Wash and Temp key simultaneously, and then turn the knob
until it display '043'.
2) Vibration Sensor Data = Vib_Sensor X-axis_01 x 100 + Vib_Sensor X-axis_02
3) Vibration Sensor status : If it displays '000', normal, '001', incorrect initial position of vibration sensor
or offset error, '002', disconnection of vibration sensor.
Vib_Sensor
Y-axis_01
Vib_Sensor
Y-axis_02
XXX
XXX
XXX
XXX
Key
Pre Wash
Reference to check the vibration sensor
error
XXX
1. Range of vibraiton sensor data has to
XXX
XXX
2. When the washer is in spin mode, if the
XXX
3)
XXX
XXX
3. In case of over-range, we also need to
22
Key
Temp.
change between 1900 and 2100 when
stopping the motor.
vibration sensor data doesn't change
and keeps the static value, disconnection
or noise effect is suspected.
check the status of vibration sensor.
Knob