LG WD14070D6 Service Manual page 15

EST. T ime remaining
This display shows:
a) the estimated time remaining in the
cycle when operating.
In case of abormal operation, error
indications are displayed.
(
¥ see troubleshooting
Beep on/off
The Beep on/off function can be set by pressing
and holding the Option2 and Rinse button
simultaneouly.
)
15
Rinse, Temp. Button
Select water temperature based
on the load type.
By pressing the Rinse button, the
Rinse type can be selected.
Tub Clean
Tub Clean course can be set by
pressing and holding Rinse button
simultaneously.
Tub Clean is a special cycle to
clean the inside of the washer.
Child Lock
Use this option to prevent unwanted
use of the washer. Press and hold
Spin button button for 3 seconds
to lock/unlock control.
When Child lock is set, CHILD LOCK
lights and all buttons are disabled
except the Power button. You can
lock the washer while it is operating.