REAR GASKET
Needed tools :12,13 mm wrench, ( ) Clamp Jig, Cable Tie, (+) Electric driver
Disassemble top plate assembly.
1
Disassemble rear cover.
2
Remove large and small gasket clamps using
3
gasket clamp jig.
4
Unfasten the nut that fastens the rear
suspension to the base.
5
Unfasten the bolt that fastens the rear
suspension to the bearing housing.
Disassemble rear suspension.
6
7
Remove 8 screws from both weights.
Disassemble rear gasket.
8
58