LG WD14070D6 Service Manual page 51

2
4
3
INLET VALVE
1
3
DOOR ASSEMBLY
1 Disconnect the wiring connectors.
2 Disassemble the inlet valve by unfastening the
screws from the valve holder.
When reconnecting the connector
VALVE 1 (STEAM:Option)
2
VALVE (PRE-WASH)
3
VALVE (NORMAL-WASH)
• Rating : 220/240V 50/60Hz
• Resistant : 3.5~4.5kΩ
1 Open the door completely.
2 Unfasten the screws from the door hinge.
3 Disassemble the door assembly by lifting it up
and then pulling it.
When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
Removing method of remaining water
Drain from hose.
First, prepare a bucket to put the remaining
water in.
CAP(REMAING HOSE)
51
VIOLET/BLACK-BLACK
WHITE/BLACK-BLACK
GRAY/BLACK