TUB BRACKET(RIGHT SIDE)
Needed tool : 12,13mm wrench, (+) Electric driver
1
Disassemble the top plate assembly.
Disassemble the control panel assembly.
2
3
Disassemble the lower cover assembly.
Disassemble the cabinet cover assembly.
4
5
Disassemble the right side cabinet assembly.
Remove the bolt that fastens the suspension assembly to the
6
tub bracket.
7
Remove the damper holder that connects the damper
assembly to the tub bracket.
Remove 4 screws that fasten the tub bracket to the weight.
8
9
Disassemble the tub bracket.
61