LG WD14070D6 Service Manual page 57

REAR COVER ASSEMBLY
Needed tool : (+) Electric driver
Disassemble top plate assembly.
1
2 Remove screws that fasten the rear cover
to the side cabinets.
3 Remove screws that fasten the rear cover
to the base cabinet.
4 Remove screws that fasten the rear cover
to the tub outer.
5 Remove screws that fasten the drain hose
holders to the rear cover.
6 Remove screws that fasten the inlet valve
assembly and the generator assembly to
the rear cover.
7 Remove 2 earth screws from rear cover.
8 Disassemble 3 holder hooks for fixing
harness.
9 Disassemble the red connector assembled
noise filter.
10 Pull out drain hose from the rear cover.
11 Disassemble back cover.
57