Maintenance - Siemens VersiCharge AC Quick Start Installation Manual

VersiCharge™ AC | Quick start installation guide

Maintenance

While there is no maintenance for the internal works of the
VersiCharge, the exterior does require some basic, common
sense maintenance. The following maintenance can be
performed by the owner/user. All other service must be
conducted by qualified personnel.
If there is any damage to the charger, contact your supplier.
General exterior maintenance is recommended to be performed
every six months depending on the environment. In harsh
environments, maintenance should be performed more often.
General exterior maintenance
Regular cleaning is recommended to avoid accumulation of
debris/dust/dirt on or around the unit. Wipe surfaces with a
soft cloth dampened with water, or for harder to removed
marks, use an alcohol based cleaner. Do not spray with high
pressure cleaning hoses or use abrasive chemicals.
General external checks
Check for cuts, cracks, damage, and debris. If debris is
present, remove it. If you find damage, contact your supplier.
Check for damage and corrosion. If present, contact your
supplier.
Check the HMI for damage/signs of faded color that is clearly
visible.
Ensure there is no debris or damage inside or around the
cable, cable holder and connector/plug. If present, remove
debris and/or notify the supplier of any damage. Check the
connector/plug pins for any signs of corrosion and contact the
supplier, if there is any damage to the pins.
Check for snow buildup around the VersiCharge and clear the
area around the VersiCharge. This should be checked daily in
areas with high snowfall.
12