Appendix A - System Operation/Faults - Siemens VersiCharge AC Quick Start Installation Manual

APPENDIX A – System Operation/Faults
Wi-Fi LED Light Sequence When Adding a Charger
Description of Sequence
Power up
Software loading
Software running
Charger in Access Point (AP) mode
Receiving connection credentials
Received connection credentials
Connecting to network
Connected to network
Connecting to VersiCloud
Connected to network, registered and connected to VersiCloud
NOTE: Grey LED Color indicates no lit LED.
Light State
Normal Operation
Light #1
Light #2
Light #5 (4 Min.)
Light #5 (1 Min.)
Light #5
Light #5
Light #7
Light #7
Light #7
Light #7
Light #9
Description
Ready to Charge – Power On –
Light steady white
Car Connected -
Light steady white
No Internet
Light blinking white for 4 min. and green
for 1 min.
Lost communication with VersiCloud
Connected to the Internet and VersiCloud
– Light steady white
Time Delay Light - Delay 2 hours – Light
blinking white
Time Delay Light - Delay 4 hours – Light
blinking white
Time Delay Light - Delay 6 hours – Light
blinking white
Time Delay Light - Delay 8 hours – Light
blinking white
Touch Sensitive Button – Press Button for 5
seconds to maximize power level.
Quick start installation guide
LED Color (Blinking)
Solution
Connect EV. Begin charge.
Disconnect the EV connection cable.
1. Mode: Wi-Fi - Check router
2. Mode: Cellular - Check cellular network settings, if
APN and Modem dial string setting are correct, call
carrier.
3. Mode: Ethernet - Check cable /network connection.
1. Slow blinking blue - weak signal (if it's Wi- Fi
network, try Wi-Fi extender, if cellular - contact
carrier, add a signal booster).
2. Fast blinking blue - power cycle, if issue persists,
call Tech Support.
No Action.
Wait for charge.
Wait for charge
Wait for charge
Wait for charge
Cancel the remote power setting by pressing button
5 seconds continuously and
| VersiCharge™ AC
LED Color (Steady)
maximizes Power.
13