Use - Qilive Q6663 User Manual

5. USE

5.1 First use
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand
new product, then dry thoroughly.
Important!
• Do not use detergents or abrasive powders, as these will damage the finish.
• After transport, unpacking and installation, let the appliance rest at least 2 hours in
vertical position before connecting to the power supply.
• Let the appliance run for at least 2 hours before inserting fresh or frozen foods.
5.2 Using the control panel
5.2.1 Operating condition
• The control panel is 100% lit up for 3 seconds and operates exactly as per the setting
(mode and temperature) before the power-off. The system will be automatically
locked 25 seconds after the last button operation. After locking, the light of the panel
will be off 2 minutes after the last button operation.
• Preset temperatures of fridge compartment and freezer compartment are shown on
the display.
5.2.2 Display
• The panel will be lit up for 2 minutes when the door of fridge compartment is opened.
• The panel will be lit up by any button operation and the light will be out 2 minutes
after the last operation.
• During normal operation, the display indicates the current temperature setting of the
fridge compartment and the freezer compartment.
5.2.3 Button assignment
• Temperature control of the fridge compartment
This button is workable in User Defined mode and Super mode. The button flashes
when you enter the temperature of the fridge compartment. The temperature changes
in the sequence of 2°C, 3°C, 4°C, 5°C, 6°C, 7°C and 8°C when you touch the key
consecutively. After 5-second flashing, the temperature selection is settled.
• Temperature control of the freezer compartment
This button is workable in User Defined mode and Holiday mode. The button flashes
after you enter the temperature of the freezer compartment. The temperature changes
in the sequence from -14°C to -22°C when you touch the button consecutively. After
5-second flashing, the temperature selection is settled.
• Mode
The operation mode will change in the sequence of ECO mode, Holiday mode, Super
mode and User Defined mode when you touch this button consecutively. A 5-second
flashing indicates that the temperature selection is settled.
• Lock/Unlock
All buttons are operable only under the unlock mode.
Press and hold the MODE button for 3 seconds. The control panel is at lock situation after
a peep. To unlock the control panel, press and hold the MODE button for 3 seconds. The
control panel is unlocked after a beep. In the unlock situation, all buttons are operational.
11 11
EN