Moto G (4th Generation)
Level 2 – Service and Repair Manual
4.
Align the Battery Wire Flex tail to the Battery
Wire BtB Connector on the PCB.
5.
Press down on the Battery Wire Flex tail to
engage the Battery Wire BtB Connector.
6.
Align the Battery Wires along the edges of the
SIM trays and Shield.
7.
Remove the adhesive liner from the Battery
Wire Block.
8.
Place the Battery Wire Block over the Battery
Wires as shown.
9.
Use the flat end of the Blackstick to press
down on the Battery Wire Block for 5 seconds
to secure it to the PCB.
PAGE 80
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola