Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
8.
Remove the phone from the Lens Removal
Fixture.
// CAUTION //
Wear protective gloves when handling heated
parts.
// CAUTION //
Do not damage the Ground Flex tabs, Display
Flex, or the Fingerprint Sensor Flex.
9.
Use the Thin Plastic Spudger to separate the
remaining adhesive from the USB side of the
phone.
// CAUTION //
Do not insert the Thin Plastic Spudger deeper
than 1 mm. Deeper insertion may separate the
Display and Lens and cause damage.
10. Verify that no other connection exists between
the Display and the Front Housing assembly.
11. Lift the Display out of the Front Housing,
guiding all flexes through the slots in the Front
Housing.
// CAUTION //
Do not damage the Ground Flex tabs, Display
Flex, or the Fingerprint Sensor Flex.
PAGE 106
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
