Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
5.
Remove the Display Adhesive from the
carrier.
6.
Place the Display Adhesive into the Affinity
Main Lens Alignment Fixture
(3-00-F9-10000), aligning it to the pins in the
fixture
// CAUTION //
Verify that the ISP Alcohol and 3M AP-111
Adhesion Promoter have dried completely
before proceeding. Failure to do so can cause
the Display to improperly adhere and reduce
the phone's water resistance.
7.
Place the Front Housing into the fixture over
the Display Adhesive.
8.
Place the Affinity Main Lens Alignment Fixture
(3-00-F9-10000) into the Press (19501980).
9.
Place the Affinity Main Lens Alignment Press
Head (3-00-F9-10000) into the Press.
10. Press the Front Housing for 10 seconds to
secure the Display Adhesive.
11. Remove the Housing from the fixture.
PAGE 116
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
