Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
// CAUTION //
Verify that the ISP Alcohol and 3M AP-111
Adhesion Promoter have dried completely
before proceeding. Failure to do so can cause
the Display to improperly adhere and reduce
the phone's water resistance.
5.
Remove the Display Adhesive liner.
6.
Remove all remaining liners from the Kapton
Tape on the Front Housing.
7.
Bend the Ground Flex tabs up at a 90-degree
angle from the Display Flex.
8.
Starting with the side closest to the Side
Keys, begin to lower the Display into the Front
Housing.
9.
Guide the Display Flex BtB Connector,
Fingerprint Sensor Flex, and two Ground Flex
tabs through the holes in the Front Housing.
// CAUTION //
Do not damage or tear the Display Flex or
Fingerprint Sensor Flex.
PAGE 123
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
