Lenovo motorola Moto G Service And Repair Manual page 71

Moto G (4th Generation)
Level 2 – Service and Repair Manual
21. Place the PCB onto the Front Housing,
aligning it to the screw bosses in the Front
Housing.
// CAUTION //
Verify the Display Flex and Fingerprint Sensor
Flex are not caught underneath the PCB. The
Fingerprint Sensor is only available on the 16
MP model.
22. Press down on the Secondary-Microphone
Grommet to engage the snap in the Front
Housing.
23. Use the Torque Driver and 3IP Torx Bit to
manually tighten the 2 3IP Machine Screws to
0.8 in-lbs (0.09 N·m).
PAGE 71
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola