Replacing The Disk And Fan Signal Cable In The 8335-Gca Or 8335-Gta System - IBM S822LC Servicing

Figure 8. Removing the disk and fan signal cable from the system backplane and the disk drive and fan card
5. Place the cable on the table.
Replacing the disk and fan signal cable in the 8335-GCA or 8335-GTA
system
Follow these steps to replace a disk and fan signal cable in the IBM Power System S822LC (8335-GCA
and 8335-GTA) system.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
2. Using the labels, connect the disk and fan signal cable (A) to the disk drive fan card (B) and to the
system backplane (C). Ensure that the cable latch clip snaps into place on the connectors.
14
Servicing the IBM Power System S822LC (8335-GCA or 8335-GTA)