Removing And Replacing Pcie Adapters In The System; Preparing The 9009-41A, 9009-42A, Or 9223-42H System To Remove And Replace A Pcie Adapter - IBM 9009-41A Manual

21. Turn off the identify LED. For instructions, see Deactivating an identify LED (www.ibm.com/support/
knowledgecenter/POWER9/p9haj/p9haj_turn_off_identify_led.htm).
Removing and replacing PCIe adapters in the 9009-41A, 9009-42A, and
9223-42H system
Find information about removing and replacing a Peripheral Component Interconnect Express (PCIe)
adapter in the IBM Power System E950 (9040-MR9).
About this task
Note: Removing or replacing this feature is a customer task. You can complete this task yourself, or
contact a service provider to complete the task for you. You might be charged a fee by the service
provider for this service.
If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in
the system. For instructions, see Repairing a part by using the HMC (www.ibm.com/support/
knowledgecenter/POWER9/p9haj/p9haj_hmc_repair.htm).
If your system is not managed by an HMC, complete the steps in the following procedures to remove and
replace a PCIe adapter in the system.
Preparing the 9009-41A, 9009-42A, or 9223-42H system to remove and replace a PCIe
adapter
To prepare the system to remove and replace a PCIe adapter in the system, complete the steps in this
procedure.
Before you begin
Note: If you are replacing a PCIe3 cable adapter that you use to attach your server to an EMX0 PCIe3
expansion drawer, you must ensure that you have the correct PCIe3 cable adapter and expansion drawer
cable to work with the PCIe3 6-slot fanout module that you have in your EMX0 PCIe3 expansion drawer.
• If you have a CCIN 50CB PCIe3 6-slot fanout module:
– You must use one of the following PCIe3 cable adapters:
- FC EJ08 (CCIN 2CE2)
- FC EJ07 (CCIN 6B52)
- FC EJ05 (CCIN 2B1C)
– You must use one of the following expansion drawer cables: FC ECC6, FC ECC7, FC ECC8, FC ECC9,
FC ECCR, FC ECCS, FC ECCX, FC ECCY, or FC ECCZ.
• If you have a CCIN 50CD PCIe3 6-slot fanout module:
– You must install one of the following PCIe3 cable adapters:
- FC EJ19 (CCIN 6B53)
- FC EJ1R (CCIN 58FF)
- FC EJ20 (CCIN 2CF5)
– You must use one of the following expansion drawer cables: FC ECCR, FC ECCX, FC ECCY, or FC ECCZ.
Procedure
1. Take appropriate precautions for avoiding electric shock and for handling static-sensitive devices. For
more information, see "Avoiding electric shock" on page 83 and "Handling static-sensitive devices"
on page 85.
2. If applicable, open the rack door at the rear of the system.
28 Power Systems: PCIe adapters for the 9009-41A, 9009-42A, or 9223-42H