Replacing A Power Supply In The 8335-Gca Or 8335-Gta - IBM S822LC Servicing

Figure 51. Disconnecting the power cord from the power supply
3. Remove the power supply from the system.
a. To unseat the power supply from its position in the system, pull up the terracotta locking-tab (A).
See Figure 52.
b. Grasp the power supply handle with one hand, and pull the power supply (B) part of the way out
of the system.
c. Place your other hand underneath the power supply and pull the power supply completely out of
the system and place it on an ESD mat.
Figure 52. Removing a power supply from the system

Replacing a power supply in the 8335-GCA or 8335-GTA

To replace a power supply in the system, complete the steps in this procedure.
Removing and replacing parts
53