Using The Installation Instructions; Intended Use - BLUM SERVO-DRIVE uno Installation Instructions Manual

Hide thumbs Also See for SERVO-DRIVE uno:

Table of Contents

Using the installation instructions

Please read the installation instructions and safety information before

SERVO-DRIVE start-up�

We recommend that you use the orientation diagram for easier identi-

fication of the parts being described�

These installation instructions can be used for the SERVO-DRIVE

electric motion support system for AVENTOS HF, AVENTOS HS,

AVENTOS HL and AVENTOS HK�

However, only AVENTOS HF is shown as an example in the illustra-

tions�

Please see the special AVENTOS installation instructions for the

assembly steps for the mechanical AVENTOS HF, HS, HL and HK

fittings without SERVO-DRIVE�

SERVO-DRIVE supports the opening and closing of lift systems and

may only be used under the following conditions:

• in dry, enclosed rooms

• in combination with AVENTOS lift systems from Julius Blum GmbH

within the permitted technical specifications

• in combination with a Blum plug-in transformer�

NOTE

➢ The total cable length of 2 metres must not be exceeded�

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the SERVO-DRIVE uno and is the answer not in the manual?