Table of Contents
Advertisement
Superabrasive
7.9 TENSIONING AND REPLACING THE PLANETARY BELT
To replace/tension the planetary belt, first follow section 7.3 to dismount the cover.
Take off the vacuum hose (Fig.7.9.1). Unscrew the seven bolts attaching the top cover
assembly (Fig.7.9.2). Tilt the machine into tool-changing position. Pull up the top cover
assembly such that it lies on the machine frame (Fig.7.9.3). Unscrew the five fastening
bolts and take out the front supporting ring (Fig.7.9.4) (Fig.7.9.5).
Figure 7.9.2
Figure 7.9.3
7.10 TENSIONING USED PLANETARY BELT
If there is a loss of speed in the planetary rotation, it is possible to tension the old planetary belt following the steps described
in Section 7.11 - Mounting and tensioning a new planetary belt.
Figure 7.10.1
Owner's Manual – LAVINA® LB36G-S
32
Figure 7.9.4
Figure 7.9.5
Figure 7.10.2
5/2018
Figure 7.9.1
Advertisement
Table of Contents
