lavina LB36G-S User Manual page 31

Superabrasive
7.8 MOUNTING AND DISMOUNTING TOOL HOLDERS TO CHANGE V-RINGS
Unscrew the nut in the center of the tool (Fig.7.8.1). Unscrew the four bolts of the
central part (Fig.7.8.2) (Fig.7.8.3) (Fig.7.8.4) and take out the tool holder with the
elastic element and the tin holder.
Unscrew the three screws (Fig.7.8.5) and under the holder unscrew the other six
screws (Fig.7.8.6) and take off the elastic element (Fig.7.8.7).
After taking out the holders unscrew the four bolts and take off the supporting disc
(Fig.7.8.8). The V-Ring should be mounted with the lip rward.
Push down the V-Ring so it levels the cover (Fig.7.8.9) (Fig.7.8.10). Push the V-Ring with the supporting disc. The working lip
of the V-Ring should slightly touch the friction plane. Do not push the V-Ring with fingers.
Owner's Manual – LAVINA® LB36G-S
Figure 7.8.2
Figure 7.8.4
Figure 7.8.6
Figure 7.8.8
Figure 7.8.10
31
5/2018
Figure 7.8.1
Figure 7.8.3
Figure 7.8.5
Figure 7.8.7
Figure 7.8.9