lavina LB36G-S User Manual page 24

Superabrasive

Air Filter

Oil Change + Filter

Spark Plugs

Seal Replacements

Chain Inspections

Belt Inspections

Tooling Inspections
Each item has individual alerts at different hour intervals, and the Fuel-Minder will start alerting the user of upcoming
maintenance within 3 hours of when it is due. To reset a particular service alert, simply scroll to it, using the + or - buttons,
then hold the reset button for 2 seconds. The meter will then prompt you to reset that interval.
Sleep Mode
To conserve equipment battery life, the Fuel-Minder will enter sleep mode if there are no key inputs or engine activity. The
backlight will dim after 30 seconds of inactivity, then turn off after 1 minute. The display will turn off after 2 minutes. To wake
from sleep mode, simply press any key or start your engine.
Main Menu Navigation and Use
This section outlines how to navigate the menu and interact with certain features.
Main Menu
The Main Menu contains the following screens, which can be viewed by simply using the + and - buttons to scroll. Please note:
Upon startup or waking from sleep mode, the first screen shown is always Engine Hours.
- Engine Hours (Default screen)
- Clean Filters
- Oil Change + Filter
- Spark Plugs
- Chain Inspections
- Seal Replacements
- Belt Inspections
- Tooling Inspections
- Battery Voltage
- Tachometer
- Options Menu
LED Alerts & Resetting Service Intervals
The Fuel-Minder will alert you when service is due by blinking a red LED within 3 hours of the specified interval and displaying
"Service Due" on the LCD screen. When you see this light, simply scroll through your menu to see which service item is due.
To reset a specific interval, just scroll to that particular screen (for example, Oil Change), then hold the SELECT button for 2
seconds until you see the reset prompt, then press the + button to reset that interval.
Owner's Manual – LAVINA® LB36G-S
24
5/2018