Kinetico SuperSoft Installation Instructions And User Manual page 13

Decals:
6
Place the in/out and overflow decals (found in the pack
included with system) on the side of the cabinet being used.
Run drain line:
7
a:
Run a drain line to a discharge point, checking for any
obstructions or possible kinks.
FOLLOW REGIONAL WATER REGULATIONS.
b:
Before connecting the drain line to the unit, slide on the
stainless steel jubilee clip.
c: Push the drain line onto the barbed fitting and tighten the
jubilee clip securely.
NOTE:
Drain lines must not run more than 2.4m up or exceed a total of 9m.
The drain line must not be restricted or kinked.
Visit: kinetico.co.uk
✗
Return to contents
Supersoft Water Softener
Installation Instructions and User Manual
13