Step 2: Install The Faucet - Waterdrop WD-D6-B Instruction Manual

3/8"
Cold Water Pipe
Washer
Feed Water
Adapter
Converter
Cold Water
Supply Valve
NOTE: If there is no hole in
your kitchen sink or countertop,
you have to drill one (1⅜")
or use the hole in the soap
dispenser. Refer to Page 4.
1. Insert the faucet stem
and power cord into
mounting washer 1.
2. Insert the faucet stem
and power cord into the
hole on the countertop.
Fix mounting washer 1
on the countertop.
3. Under the sink, put
mounting washer 2 and 3
on the faucet stem. Slip
on the nut and tighten it.
4. Insert one end of the
blue 1/4" PE tubing into
the quick-connect fitting
on the faucet and pop in
the lock clip on the fitting.
1/4'' Inlnet Water
Tubing
Figure 4
Step 2:
Install the Faucet
Quick-Connect Fitting
Mounting Washer 2
*Mounting Washer 1
*NOTE: Please use the black mounting washer that has the groove. You
won't need the other black mounting washer.
Screw
B
A
Unscrew
Faucet Body
Faucet Stem
Nut
Mounting Washer 2
6
Cold Water Pipe
Figure 5
Faucet Spout
Mounting Washer 1
Countertop
Faucet Power Cord
Mounting Washer 3
Outlet Water Tubing
Mounting Washer 3
1/2"