General Characteristics - Cembre NR-13E Operation And Maintenance Manual

ENGLISH
IMPACT WRENCH TYPE:
Application range:
Capacity: (max. bolt diameter)
Max. torque developed:
Electric motor:
Voltage supply:
Power rating:
Power loss safety switch:
Impact unit:
square drive (DIN 3121):
lubrication grease:
Gear change:
Reduction gear
recommended oil (250 ml):
Dimensions:
Weight:
Acoustic noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
– The acoustic power level emitted by the machine
L is equal to .........................................................................................................................................................107.2 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 and UNI EN 28662-1
Standards, and under operating conditions much more severe than those normally found, certify that the
weighted root mean square in frequency of the acceleration the upper limbs are exposed is 7 m/sec

1. GENERAL CHARACTERISTICS

suitable for tightening and loosening operations using an impact
is equal to ...................................................................................................................98.4 dB (A)
pA
is equal to ..........................................................................................123.6 dB (C)
pCPeak
NR-13E
system, for railway and industrial applications.
2500 Nm (1844 ft.lbs)
single-phase
220 - 230 V / 50 - 60 Hz
automatic switch off in case of loss
of electrical power to protect the operator against
accidental starting
25,4 mm (1")
KLUBER STABURAGS N12MF (100 gr.)
manual, 3 positions
SYNTHY TOOL MACHINE ISO 100/GX5 or
BEL-RAY SE-2 LUBRICANT ISO 100 or equivalent
Refer to Fig. 14 page 56
NR-13E-110
33 mm
110 -120 V / 50 - 60 Hz
3000 W
21 kg
max.
2
4