Audio Setup; Video Setup; Preference Setup; 5. Password Setup - Clatronic DVD 613 User Manual

Initial Setting

2. Audio setup

2.1 SPEAKER SETUP - it is used to set the speaker
Outputs levels
DOWNMIX mode
Options: LT/RT-Left/Right mix mode
STEREO - Select this option if you don't
Have a 5.1 channels amplifi er.
Front Speaker
Options: Large- select this option to increase the
front speaker's volume.
Small- select this option to decrease the
front speaker's volume.
2.2 SPDIF SETUP
2.2.1 SPDIF OUTPUT - digital outputs code format
Options: OFF/RAW/PCM/MANUAL
If MANUAL is selected, the options for CD,DOLBY
DIGITAL DTS, MPEG, PCM CHANNEL can be
selected individually. Otherwise, they will output At
the same format:RAW or PCM.
Recommended settings:
SPDIF OUTPUT: SPDIF OFF
(if you are not connecting to an amplifi er via Digital
output)
SPDIF OUTPUT: SPDIF/RAW
(Used in general home theater,select this can
output 5.1 channel)
SPDIF OUTPUT: SPDIF/PCM
(select this it can only output 2 channel,but you will
get high quality audio)
2.2.2 LPCM OUT - set bit-rate of coaxial and optical
output Options: 96K/48K
(If you are connecting to an amplifi er via digital
output please reference your digital amplifi er
manual before you select this option)

3. Video setup

3.1 TV TYPE
Options: PAL/MULTI/NTSC
3.2 TV OUTPUT
Options: CVBS/RGB
CVBS = Composite output
RGB = RGB output
5....-05-DVD 613 GB 51

4. Preference setup

The fi rst Power on this set by press power button on
the front plane without placing any disc on this tray,
press setup button, then you can enter the Preference
Page by pressing navigate button .
4.1 PBC - select PlayBack Control for VCD
Options: On/Off
(Recommended setting: ON)
4.2 AUDIO - select preferred audio language.
(DVD only - need disc software support)
4.3 SUBTITLE - select preferred subtitle language.
(DVD only - need disc software support)
4.4 DISC MENU - select preferred disc menu
language.
(DVD only - need disc software support)
4.5 PARENTAL - select rating levels. You must set
PASSWORD MODE OFF to enable this selection.
(DVD only - need disc software support)
4.6 DEFAULT - Reset to factory settings

5. Password Setup

5.1 PASSWORD MODE
Options: ON/OFF
5.2 PASSWORD
Option: Change
Select to change password
5.2.1 OLD PASSWORD
5.2.2 NEWPASSWORD
5.2.3 CONFIRMPWD
Procedure to change password:
1) Enter old password in the OLD PASSWORD row
2) Enter new password in the NEWPASSWORD row
3) Enter the new password again in the
CONFIRMPWD row
You may reset the password if you forget the old
password by using the supervisor password: 1379
51
15.03.2004, 15:47:51 Uhr