Clatronic DVD 613 User Manual page 39

Optional audio connections
Notes when connecting the optical digital audio
cable (optional)
• Remove the dust protection cap from the optical
digital audio output and connect the cable fi rmly
so that the confi gurations of both the cable and the
connector match.
• Keep the dust protection cap and to protect against
dust, always reattach the cap when not using the
connector.
Concerning the audio output from the player's
optical/coaxial digital audio output connector
Sound recording
Disc
format
DolbyDigital
(AC-3)
DVD
Linear PCM
(48/96 kHz
16/20/24 bit)
Video CD MPEG1
CD Linear PCM
*1 The type of audio output from the connector can be
selected by the initial settings.
*2 Sound having 96 KHz sampling is converted into
48 Khz or 96KHz sampling when it is output from
the player's optical/coaxial digital audio output
connector.
For your reference:
• Dolby Digital (AC-3) is a digital sound compression
technique developed by the Dolby Laboratories
Licensing Corporation.
• Linear PCM is signal recording format used in a CD.
While a CD is recorded in 44.1 KHz/16 bit, a DVD is
recorded in 48 KHz/16 bit up to 96 KHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder,
you will obtain the full benefi t of Pro Logic from
the same DVD movies that provide full 5.1-channel
Dolby Digital soundtracks, as well as from titles with
the Dolby Surround mark.
5....-05-DVD 613 GB 39
Optical/coaxial digital audio
output from connector
DolbyDigital bitstream
(2-5.1ch) or PCM (2 ch)
(48 kHz/16 bit)*1
Linear PCM (2ch)
(48 KHz sampling/16 bit only)*2
or no output*1
PCM
(44,1 kHz sampling)
Linear PCM
(44,1 kHz sampling)
Manufactured under license from Dolby
Laboratories. „Dolby" and the double-D
symbol are trademarks of Dolby Laboratories.
Confi dential Unpublished Works. © 1992-1997
Dolby Laboratories, inc. All rights reserved.
39
15.03.2004, 15:47:47 Uhr