Advertisement
Steps
1. Gently place the fan and heat-sink assembly on the processor.
2. Align the screw holes on the fan and heat-sink assembly with the screw holes on the system board.
3. In sequential order (1>2>3>4) tighten the four captive screws that secure the fan and heat-sink assembly to the system
board.
4. Connect the fan cable to the connector on the system board.
Next steps
1. Install the
fan
shroud.
2. Install the
side
cover.
3. Follow the procedure in
Processor
Removing the processor
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
fan
shroud.
4. Remove the
fan and heat-sink
NOTE:
Caution: The processor may become hot during normal operation. Allow sufficient time for the processor to cool
before you touch it.
After working inside your
Before working on your
computer.
assembly.
computer.
Disassembly and reassembly
37
Advertisement
