Advertisement
Optical drive
Removing the optical drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
About this task
The following images indicate the location of the optical drive and provides a visual representation of the removal procedure.
Steps
1. Disconnect the power and data cable from the optical drive.
2. Pull down on the retention tab to release the optical drive.
3. Slide and remove the optical drive from the front slot on the chassis.
Installing the optical drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
When installing the optional optical drive, ensure that the front cover of your computer has the slot for it.
The following images indicate the location of the optical drive and provides a visual representation of the installation procedure.
28
Disassembly and reassembly
Before working on your
computer.
Advertisement
