Advertisement
NOTE:
Caution: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
Steps
1. Press the release lever down and then push it away from the processor to release it from the securing tab.
2. Lift the lever upward to lift the processor cover.
CAUTION:
When removing the processor, do not touch any of the pins inside the socket or allow any objects
to fall on the pins in the socket.
3. Gently lift the processor from its socket on the system board.
Installing the processor
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
38
Disassembly and reassembly
Advertisement
