Advertisement
Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Install the screw (M2x3) to secure the solid-state drive to the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the removal
procedure.
After working inside your
Before working on your
computer.
computer.
Disassembly and reassembly
21
Advertisement
