Advertisement
About this task
The following images indicate the location of the 3.5-inch hard-drive and provides a visual representation of the removal
procedure.
Steps
1. Disconnect the data and power cables from the 3.5-inch hard-drive.
2. Remove the four (#6-32) screws that secure the 3.5-inch hard-drive.
3. Lift the 3.5-inch hard-drive away from the system.
Installing the 3.5-inch hard-drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 3.5-inch hard-drive and provides a visual representation of the installation
procedure.
18
Disassembly and reassembly
Advertisement
