Advertisement
Steps
1. Align the 3.5-inch hard-drive with the mounting holes on the front side of the chassis.
2. Install the four (#6-32) screws to secure the 3.5-inch hard-drive to the chassis.
3. Reconnect the power cable and data cables to the 3.5-inch hard-drive.
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the M.2 2230 solid-state drive and provide a visual representation of the removal
procedure.
After working inside your
Before working on your
computer.
computer.
Disassembly and reassembly
19
Advertisement
