Advertisement
Steps
1. Ensure that the securing-clips are in the open position.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing
clip locks in place. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks
into place.
NOTE:
The securing-clips must return to the locked position when the memory modeule is installed. If you do not hear
the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 3 when installing more than one memory module in your computer.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
3.5-inch hard drive
Removing the 3.5-inch hard-drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
After working inside your
Before working on your
computer.
computer.
Disassembly and reassembly
17
Advertisement
