Table of Contents
Advertisement
Auto Onhook Time
Ring for Headset
Auto Headset
Enable Silent Mode
Disable Mute for Ring
Enable Default Line
Enable Auto Switch Line
Default Ext Line
Ban Outgoing
Hide DTMF
Enable CallLog
Enable Restricted Incoming List
Enable Allowed Incoming List
Enable Restricted Outgoing List
Enable Country Code
Country Code
Area Code
Enable Number Privacy
Match Direction
Start Position
Hide Digits
Allow IP Call
P2P IP Prefix
Specify Auto Onhook time, the phone will hang
up and return to the idle automatically after Auto
Hand down time at hands-free mode, and play
dial tone Auto Onhook time at handset mode
Enable Ring for Handset by selecting it, the
phone plays ring tone from handset.
Enable this feature, headset plugged in the
phone, user press 'answer' key or line key to
answer a call with the headset automatically.
When enabled, the phone is muted, there is no
ringing when calls, you can use the volume keys
and mute key to unmute.
When it is enabled, you can't mute the phone
If enabled, user can assign default SIP line for
dialing out rather than SIP1.
Enable phone to select an available SIP line as
default automatically
Select the default line to use for outgoing calls
If you select Ban Outgoing to enable it, and you
cannot dial out any number.
Configure the hide DTMF mode.
Select whether to save the call log.
Whether to enable restricted call list.
Whether to enable the allowed call list.
Whether to enable the restricted allocation list.
Whether the country code is enabled.
Fill in the country code.
Fill in the area code.
Whether to enable number privacy.
Matching direction, there are two kinds of rules
from right to left and from left to right.
Open number privacy after the start of the
hidden location.
Turn on number privacy to hide the number of
digits.
If enabled, user can dial out with IP address
Prefix a point-to-point IP call.
45
Advertisement
Table of Contents
