Line >> Dial Plan - 2N IP Handset User Manual

11.15 Line >> Dial Plan
Parameters
Press # to invoke dialing
Dial Fixed Length
Timeout dial
Press # to Do Blind Transfer
Blind Transfer on Onhook
Attended Transfer on Onhook
Attended Transfer on Conference Onhook
Enable E.164
Picture 19 - Dial plan settings
Table 8 - Phone 7 dialing methods
Description
The user dials the other party's number and then
adds the # number to dial out;
The number entered by the user is automatically
dialed out when it reaches a fixed length
The system dials automatically after timeout
The user enters the number to be transferred
and then presses the "#" key to transfer the
current call to a third party
After the user enters the number, hang up the
handle or turn off the hands-free function to
transfer the current call to a third party.
Hang up the handle or press the hands-free
button to realize the function of attention
-transfer, which can transfer the current call to a
third party.
During a three-way call, hang up the handle and
the remaining two parties remain on the call.
Please refer to e. 164 standard specification
41