Network >> Service Port - 2N IP Handset User Manual

In IPv4 mode, there are 3 connection mode options: DHCP, PPPoE and Static IP.
When using DHCP mode, phone will get the IP address from DHCP server (router).
⚫ Use DHCP DNS: It is enabled as default. "Enable" means phone will get DNS
address from DHCP server and "disable" means not.
⚫ Use DHCP time: It is disabled as default. "Enable" to manage the time of get
DNS address from DHCP server and "disable" means not.
When using PPPoE, phone will get the IP address from PPPoE server.
⚫
Username: PPPoE user name.
⚫
Password: PPPoE password.
When using Static IP mode, user must configure the IP address manually.
⚫
IP Address: Phone IP address.
⚫
Mask: sub mask of your LAN.
⚫
Gateway: The gateway IP address. Phone could access the other network via
it.
⚫
Primary DNS: Primary DNS address. The default is 8.8.8.8, Google DNS server
address.
⚫
Secondary DNS: Secondary DNS. When primary DNS is not available, it will
work.
◼
Pv6
In IPv6, there are 2 connection mode options, DHCP and Static IP.
⚫
DHCP configuration refers to IPv4 introduction in last page.
⚫ Static IP configuration is almost same as IPv4's, except the IPv6 Prefix.
⚫
IPv6 Prefix: IPv6 prefix, it is similar with mask of IPv4.
11.10 Network >> Service Port
This page provides settings for Web page login protocol, protocol port settings and RTP
port.
29