Table of Contents
Advertisement
Blocking Anonymous Call
User Agent
Specific Server Type
SIP Version
Anonymous Call Standard
Local Port
Ring Type
Enable user=phone
Use Tel Call
Auto TCP
Enable Rport
Enable PRACK
DNS Mode
Enable Long Contact
Enable Strict Proxy
Convert URI
Use Quote in Display Name
Enable GRUU
Sync Clock Time
Enable Inactive Hold
Caller ID Header
Use 182 Response for Call waiting
previous authentication
Reject any incoming call without presenting
caller ID
Set the user agent, the default is Model with
Software Version.
Set the line to collaborate with specific server
type
Set the SIP version
Set the standard to be used for anonymous
Set the local port
Set the ring tone type for the line
Sets user=phone in SIP messages.
Set use tel call
Using TCP protocol to guarantee usability of
transport for SIP messages above 1500 bytes
Set the line to add rport in SIP headers
Set the line to support PRACK SIP message
Select DNS mode, A, SRV, NAPTR
Allow more parameters in contact field per RFC
3840
Enables the use of strict routing. When the
phone receives packets from the server，it will
use the source IP address, not the address in
via field.
Convert not digit and alphabet characters to
%hh hex code
Whether to add quote in display name, i.e. "2N"
vs 2N
Support Globally Routable User-Agent URI
(GRUU)
Time Sync with server
With the post-call hold capture package
enabled, you can see that in the INVITE
package, SDP is inactive.
Set the Caller ID Header
Set the device to use 182 response code at call
waiting response
37
Advertisement
Table of Contents
