2N IP Handset User Manual page 39

Activate
Username
Authentication User
Display Name
Authentication Password
Realm
Server Name
SIP Server 1
Server Address
Server Port
Transport Protocol
Registration Expiration
SIP Server 2
Server Address
Server Port
Transport Protocol
Registration Expiration
SIP Proxy Server Address
Proxy Server Port
Proxy User
Proxy Password
Backup Proxy Server Address
Backup Proxy Server Port
Basic Settings
Enable Auto Answering
Auto Answering Delay
refresh the page manually.
Whether the service of the line is activated
Enter the username of the service account.
Enter the authentication user of the service
account
Enter the display name to be sent in a call
request.
Enter the authentication password of the service
account
Enter the SIP domain if requested by the service
provider
Input server name.
Enter the IP or FQDN address of the SIP server
Enter the SIP server port, default is 5060
Set up the SIP transport line using TCP or UDP
or TLS.
Set SIP expiration date.
Enter the IP or FQDN address of the SIP server
Enter the SIP server port, default is 5060
Set up the SIP transport line using TCP or UDP
or TLS.
Set SIP expiration date.
Enter the IP or FQDN address of the SIP proxy
server.
Enter the SIP proxy server port, default is 5060.
Enter the SIP proxy user.
Enter the SIP proxy password.
Enter the IP or FQDN address of the backup
proxy server.
Enter the backup proxy server port, default is
5060.
Enable auto-answering, the incoming calls will
be answered automatically after the delay time
Set the delay for incoming call before the system
33