Loudspeaker (L-Ch, R-Ch) - Sony HT-MT500 Service Manual

HT-MT500/MT501

2-11. LOUDSPEAKER (L-CH, R-CH)

Note 2: When connecting the terminals of
the speaker connection cable to the
loudspeaker, be careful of the
direction of the terminals.
speaker connection cable (2P)
OK
NG
terminal
(wide)
6 loudspeaker (R-ch)
Note 1: When installing the loudspeaker (R-ch),
check the position of the terminals and
align the two bosses and two holes.
1 three screws
(BVTP3 8)
hole
1 screw
(BVTP3
6 loudspeaker (L-ch)
Note 1: When installing the loudspeaker (L-ch),
18
terminal
(narrow)
loudspeaker (R-ch)
front side
right side
boss
4 terminal
(wide)
5 speaker connection
cable (2P)
4 terminal
(narrow)
hole
8)
2 wire
1 screw
(BVTP3 8)
check the position of the terminals and
align the two bosses and two holes.
Note 2: When connecting the terminals of
the speaker connection cable to the
loudspeaker, be careful of the
direction of the terminals.
speaker connection cable (3P)
OK
NG
OK
NG
3 Pull out the speaker block
in the direction of the arrow.
boss
top side
4 terminal
(wide)
hole
4 terminal
(narrow)
hole
1 three screws
(BVTP3 8)
terminal
front side
(wide)
3 Pull out the speaker block
in the direction of the arrow.
speaker block
boss
boss
5 speaker connection
cable (3P)
terminal
OK
(narrow)
NG
loudspeaker (L-ch)
left side